Request a Quote

By contacting us your information will only be used to respond to your enquiry, we will comply with the Privacy Protection Agreement to protect your privacy.
Thank you for your trust.

Oil Unloading Operation Of Eaglestar Mobile Fuel Dispenser

Mac 3 2021-12-04 11:01:31

If you are the owner of a fueling station, you have to consider everything for a good operation, such as how to provide high-efficient fueling for customers. Just like our other products, such as EG1 (, EG3 (, EG5 (, EG6 ( and EG7 (, our mobile fuel dispenser can help you provide an excellent fueling experience for customers.


Let us take a look at how the oil unloading operation of our mobile fuel dispenser is like. You may perform as follows:


Stop the tank truck at a suitable position, then connect the ground clamp of the electrostatic grounding alarm to the metal parts of the tank truck. If the grounding alarm gives an alarm, you need to reconnect it until there is no alarm any more. Secondly, connect the unloading tube of the tank truck to the unloading outlet of the skid-mounted unit. Thirdly, open the unloading valve of the tank truck, and then the unloading outlet ball valve of the skid-mounted unit and the inlet ball valve of the tank. Press the start button on the electric cabinet to start the unloading pump. When the tank level reaches the upper limit of the controller, the oil pump will stop unloading automatically. At this time, close the inlet ball valve and outlet ball valve, and then the tank truck valve. Put away the unloading tube and electrostatic grounding clamp, thus unloading is finished.